Real World AIMachine Learningin the smallest space
Neural Networks and Embedded Systems for compact applications - by experienced experts.Neural Networks and Embedded Systems
for compact applications - by experienced experts.
Ready for your next project?
Let's discuss your ideas and requirements in a free consultation.
Official Partner
As a Design Services Partner of Lattice Semiconductor, we combine deep expertise in Embedded Systems with direct access to manufacturer support and the latest technologies.
Neural Networks in the Smallest Space
With microML, we developed an embedded platform that runs neural networks on just 32 × 24 mm. Based on the Lattice CrossLink-NX-33 FPGA - compact, energy-efficient, and powerful.
Ultra-compact
Just a quarter of a credit card, with an on‑board camera
Low-Power Lattice FPGA
Camera interface, CNN inference, result interpretation - everything on one chip
No Overhead
Neural networks run directly on the FPGA - no external host processor needed
Ultra-compact
Just a quarter of a credit card, with an on‑board camera
Low-Power Lattice FPGA
Camera interface, CNN inference, result interpretation - everything on one chip
No Overhead
Neural networks run directly on the FPGA - no external host processor needed
One platform, many possibilities
NanEye Camera
Directly mountable with the tiny NanEye - ideal for computer vision in the smallest spaces
Diverse Sensors
Tactile sensors, microphones, IMUs, force sensors - flexibly expandable for a wide range of applications
Robotics
Compact enough for finger, joint and head - Edge AI right where the robot feels and hears
Why microML?
Extremely compact
AI inference on a PCB that fits in the palm of your hand - ideal for space-critical applications
Reflexes in milliseconds
Decisions are made right at the sensor - deterministic, without a detour via host computer or cloud
Fully optimized
From sensor interfacing to inference - every layer of the architecture is trimmed for efficiency, without unnecessary abstraction
Embedded Computer Vision
As small as it gets
We develop extremely compact and energy-efficient computer vision technologies for you, for example with our microML platform. We can integrate cameras measuring just 1×1×2 mm - smaller than a grain of rice.
Extremely small
At a resolution of 320 x 320 pixels - perfect for Embedded Computer Vision
Energy-efficient
Only 6-12 mW power consumption depending on framerate
Minimal circuit complexity
With our custom IP cores, the camera can be connected directly to the FPGA
Applications
Humanoid Robots
Edge AI alongside the main computer - a nervous system made of many small AI modules
Reflexes
Sensors and actuators coupled directly - grip correction in milliseconds, without a detour via the central brain
Hearing
Microphone arrays that detect direction and process sounds right where they occur
Your Benefits
Extremely small
At a resolution of 320 x 320 pixels - perfect for Embedded Computer Vision
Energy-efficient
Only 6-12 mW power consumption depending on framerate
Minimal circuit complexity
With our custom IP cores, the camera can be connected directly to the FPGA
Applications
Humanoid Robots
Edge AI alongside the main computer - a nervous system made of many small AI modules
Reflexes
Sensors and actuators coupled directly - grip correction in milliseconds, without a detour via the central brain
Hearing
Microphone arrays that detect direction and process sounds right where they occur
These customers rely on us for Embedded Systems and Edge AI
Our Technology Expertise
Everything your embedded project needs - in one place.
Flexibly combined according to your needs. From individual building block to complete system.
Electronics Engineering
FPGA Design
Verification
Embedded Software
Electronics Engineering
FPGA Design
Verification
Embedded Software
For Your Project
Neural Networks
From CNN design through training to deployment on hardware platforms
Computer Vision
Direct connection of cameras and sensors to FPGAs - including sensor fusion
CI/CD Pipelines
Automated build and test pipelines for FPGAs and embedded software
System Integration
Complex systems with FPGAs, microprocessors, and real-time Ethernet
FPGA Platforms
Award-winning Lattice low power FPGAs and Lattice sensAI™ solution stack enables intelligent Edge AI with efficient neural network inferencing near the sensor.
AMD: Spartan, Zynq & Versal
Large-scale FPGAs and SoCs for hardware-software integration, data-intensive applications, and high-end signal processing.
Additional Platforms
Your Expert Team for
Embedded Systems & Edge AI
We are a team of Embedded Software Engineers, Hardware Engineers, and Machine Learning Engineers. United by our passion for compact Embedded Systems and
Real World AI.
Christian Dense
CEO / Embedded Software
Studied Computer Engineering, 6 years in the Embedded industry. Worked at Leibniz University Hannover, FAIR (particle accelerator), and Sennheiser. Responsible for Embedded Software, FPGA designs, and project management.
Maximilian Strake
Machine Learning Engineer / Audio
PhD in Deep Learning for noise suppression at TU Braunschweig. Published numerous international papers and successfully implemented industrial neural network projects. Our expert for audio and machine learning.
Moritz Klose
Machine Learning Engineer
Studied Computer Engineering in Hannover and Vienna, master's thesis at IAV. Worked as Data Analyst at Enercity and has realized numerous projects in computer vision. Focus: Multimodal neural networks and robotics.
Julius Strake
Electronics Engineer / PCB Design
Master's degree in Physics, three years of research experience in massively parallel network simulations at FZ Jülich. Responsible for schematics, low-level software, and PCBs.
Tiago Morato
DevOps Engineer
Ensured software quality at Hacon (Siemens Mobility). As our DevOps Engineer, he owns our build, test, and deployment processes.
Klaus Kämper
Finance / Accounting
Studied Business Administration, worked at a tax office and TÜV. Responsible for our accounting, invoicing, and everything finance-related.
Christian Dense
CEO / Embedded Software
Studied Computer Engineering, 6 years in the Embedded industry. Worked at Leibniz University Hannover, FAIR (particle accelerator), and Sennheiser. Responsible for Embedded Software, FPGA designs, and project management.
Maximilian Strake
Machine Learning Engineer / Audio
PhD in Deep Learning for noise suppression at TU Braunschweig. Published numerous international papers and successfully implemented industrial neural network projects. Our expert for audio and machine learning.
Moritz Klose
Machine Learning Engineer
Studied Computer Engineering in Hannover and Vienna, master's thesis at IAV. Worked as Data Analyst at Enercity and has realized numerous projects in computer vision. Focus: Multimodal neural networks and robotics.
Julius Strake
Electronics Engineer / PCB Design
Master's degree in Physics, three years of research experience in massively parallel network simulations at FZ Jülich. Responsible for schematics, low-level software, and PCBs.
Tiago Morato
DevOps Engineer
Ensured software quality at Hacon (Siemens Mobility). As our DevOps Engineer, he owns our build, test, and deployment processes.
Klaus Kämper
Finance / Accounting
Studied Business Administration, worked at a tax office and TÜV. Responsible for our accounting, invoicing, and everything finance-related.
How we work together
From the initial idea to the finished product - we guide you through every step of your Embedded Systems development.
Free Initial Consultation
In a free initial consultation, we look at your ideas, requirements, or specific tasks and find out if we're a good fit.
Initial assessment of implementation, possible technologies, and approximate effort.
Detailed Proposal
If everything fits, we create a detailed proposal and immediately start with the concrete planning of your project.
Technology stack, timeline, and transparent cost estimate.
Agile Implementation
We assemble an expert team that realizes your project quickly and reliably. We regularly present progress and collect feedback.
Continuous updates until successful project completion.
Long-term Support
We're happy to support the project beyond the initial release.
So your customers always get the best update.
Ready for your next project?
Let's discuss your requirements in a free consultation.
No obligations - just honest assessments and concrete solutions.
Custom Embedded Systems
for your use case
For a broadcast company, we developed the LANgpio. It enables remote control of sync generators via Ethernet. With imperceptible latency - for professional live operation.
Your Benefits
Single Source
Hardware, software, tests, and integration - from a single team
Agile Execution
Short iterations, early testing opportunities, and fast progress
Reliable Delivery
On time, in verified quality, and ready for deployment
Long-term Support
From the first prototype through production launch and beyond
From Sennheiser Quality
to Edge AI Innovation
As an Embedded Software Engineer at Sennheiser, my team and I developed the world's most advanced wireless microphones.
Now I'm taking your embedded projects to the next level - with compact neural networks and custom-built hardware.
Christian Dense
CEO, Densetech
"At Sennheiser, I learned what it means to develop Embedded Systems at the highest level - from concept to mass production. At Densetech, I combine this experience with cutting-edge machine learning technology - to bring the most compact AI systems of the future to life."
Top-Tier Experience
Co-developed market-leading digital wireless microphones
AI Pioneer from Day One
Building AI pipelines since 2023 for maximum development efficiency and highest quality
Vision
The nervous system for robots: AI modules for finger, joint and ear
Christian Dense
CEO, Densetech
What our Customers say
Trust in the experiences of our satisfied customers.
Here are some voices about our work.
"Densetech has been an absolutely reliable partner in embedded and software development for us since 2024. We look forward to continued collaboration."
Christoph Haßenpflug
CEO, Blume Elektronik GmbH
"For CLARUS, Densetech took over the complete PCB and software development. Even with highly individual requirements, the team delivers truly outstanding work."
Claudius Nowack
Founder, Project CLARUS
"We chose Densetech for the second time - the solutions are stable, easy to integrate, and backed by reliable support."
Ralf Dragon
CSO, uniqFEED AG
Benefit from our expertise too.
Start your next projectwith Densetech
Embedded Systems and Machine Learning from a single source.
Free consultation - with immediate assessment.
What you get in the initial consultation:
Feasibility Analysis
Initial assessment of technical implementation
Technology Consulting
Concrete solutions for your project
Timeline Planning
Realistic implementation timeframes
Effort Estimation
Approximate costs and resources